[BFE V1.2] Gameplay Support (DE/ENG)

    Achtung: Wir haben die Abstürze beim Starten und Spielen der Bieberfelde-Modifikation untersucht und verschiedene Ursachen identifiziert. Wir bitten darum, nachfolgende Hinweise zu beachten.

    • hi,

      I have an issue with the firefighters they can't extinguish any fires if i equip them with fire extinguishers they can but if i give them hoses they can't.
      When i use rapid deployment 2 firefighters hop out and 1 starts pumping and the other starts extinguishing so that works but you can't use the other firemen in the truck
    • Neu

      @Kloppo2601: Hast du die DLK durch Klicken auf das Haus aufbauen lassen, oder hast du den Aufbauen-Befehl im Benü der Drehleiter benutzt? Das funktioniert nämlich nur, wenn du sie duch Klicken auf das Haus aufbauen lässt. Das freie Aufbauen ist nur für die Brandbekämpfung da.

      @helsen555: One firefighter has to operate the pump. When using rapid deployment he does this automaticly, but when using normal hoses you have to order one firefighter to do that: Just right click with him on the engine and don't send him away.
    • Neu

      Hello,

      Since the update to 1.2 I can't get the hoses to work for the HLF. The rapid deployment still works, but manually it doesn't.

      I tried it in different order:
      - First the fire fighter with hose to the hydrant and connect it to the HLF, then connect the hoses of the two fireman (with PA) tot the hlf and then start the pump.
      - First the fire fighter with hose to the hydrant and connect it to the HLF, then start the pump and then connect the hoses of the two fireman (with PA) to the hlf.
      - First connect the hoses of the two fireman (with pa) to the HLF, then connect the hose from the hydrant to the hlf and then start the pump
      - First connect the hoses of the two fireman (with pa) to the HLF, then start the pump with a firemen withouth PA and then connect the hose from a hydrant to the HLF
      - First connect the hoses of the two fireman (with pa) to the HLF, then start the pump with a firemen with PA and then connect the hose from a hydrant to the HLF


      I tried the waterlogic button in the debug menu already. It seems the only way to let it work is to lay down 'verteilers' from the hlf and connect the hoses of the fireman with that.

      Can someone please give the solution?
    • Neu

      @Kloppo2601 du musst die DLK mittels klick auf das Haus ausrichten (baut sich dann automatisch auf) und nicht einfach "wild" hinstellen.
      Selbst wenn du das so machst kann manchmal die Meldung kommen, DLK einfach wieder abbauen, ein Stückchen wegfahren und erneut mittels klick aufs Haus / Gebäude ausrichten...

      @bos14887 you need to use the three-way distributor. After connecting a hose on the HLF, go and place with this firefighter the distributor. As far as I can remember you will get the option with a right click on the firefighter after you connected the hose on the HLF. Then you can connect up to 3 hoses to the distributor. It should work now. You can also watch some Bieberfelde 1.2 Youtube Gameplays, that may help as well.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von lock-lost ()